| Table-W | 32" |
| Table-L | 16" |
| Horz/Vert | Horz |
| Power | 7.5 hp |
| Grinding Wheel Width | 1.5" |
| Grinding Wheel Dia. | 14" |
| Weight | 6500 |
FEATURES:
V & FLAT TURCITE TABLE WAYS
DOUBLE - V TURCITE CROSS WAYS
FULLY AUTO LUBRICATING PUMP
SOLID STATE CROSS-FEED
AUTOMATIC INCREMENTAL DOWN-FEED
FULLY AUTOMATIC CYCLE CONTROL WITH SPARK-OUT TIME & AUTO STOP
7.5 HP SPINDLE MOTOR
SPECIFICATIONS:
OVERALL WORKING AREA........................ 32" X 16"
LONGITUDINAL TABLE TRAVEL................... 36 1/4"
CROSS FEED SADDLE TRAVEL.................... 17 3/4"
DISTANCE SPINDLE CENTER TO TABLE ........... 23 5/8"
TABLE LOAD INCLUDING MAGNETIC CHUCK......... 1540 LBS
TABLE & CROSS-FEED:
T-SLOT...................................... 1/2"
LONGITUDINAL TABLE SPEED.................... 15 - 85 FPM
CROSS FEED ON HAND WHEEL.................... 0.001" GRADUATION
REVOLUTION OF HAND WHEEL.................... 0.2 IPR
AUTO CROSS FEED PER STROKE.................. 0.004" - 0.5"
POWER CROSS FEED............................ 47 1/4IPM
GRINDING WHEEL:
GRINDING WHEEL (ODxTxID) ................... 14" X 1 1/2" X 5"
GRINDING WHEEL SPEED ....................... 1740 RPM
VERTICAL MOVEMENT:
VERTICAL HAND WHEEL......................... 0.000050" GRADUATION
VERTICAL HAND WHEEL REVOLUTION.............. 0.025 IPR
AUTO DOWN FEED INCREMENT (5 STEPS).......... 0.00025" - 0.00125"
RAPID ELEVATING............................. 6 1/4 IPM
MOTOR:
SPINDLE MOTOR .............................. 7.5 HP (220/440/60/3)
HYDRAULIC MOTOR ............................ 3 HP (220/440/60/3)
MACHINE NET WEIGHT ......................... 6,160 LBS
* 16" X 32" ELECTRO-MAGNETIC CHUCK
* MAGNETIC SEPARATOR & COOLANT SYSTEM
* DUST COLLECTION SYSTEM
* REAR FULL LENGTH SPLASH GUARD
* TWO FRONT TABLE SPLASH GUARD
* OVER HEAD HYDRAULIC DRESSER
* "NEW IN BOX" CARTIGE W/ DIAMOND TIP FOR DRESSER UNIT
* "NEW IN BOX" NORTON GRINDING WHEEL
