Swing | 14" |
Centers | 42" |
Spindle Bore | 158" |
Power | 5 hp |
Swing Over Cross Slide | 9" |
Weight | 1860 |
Specifications:
Capacities:
Swing Over Bed.............................. 14 5/8"
Swing Over Cross Slide...................... 9"
Between Centers............................. 42"
Threads & Feeds:
Quick Change Gear Box and Automatic Apron
Longitudinal Feed........................... 0.0006 - 0.0350 IPR
Cross Feed.................................. 0.6 times
Threads (48)................................ 4 - 224 TPI
Headstock & Spindle:
Hole Thru Spindle........................... 1 5/8"
Nose Mounted Collet Capacity................ 1 1/2"
Draw-In Type Collet Capacity................ 1 1/16"
Spindle Bearings: Preloaded, Permanently Sealed Ball Bearings
Heat-Treated and Ground Steel Spindle Nose.. D1-4
Collet Size................................. 5C
Cross Slide Compound:
Cross Slide Travel.......................... 10"
Compound Slide Travel....................... 4"
Compound Swivel Graduated 90 in Both Directions
Tool Post Opening for 1/2"
Bed:
Width of Bed Across Ways.................... 10"
Length of Bed............................... 68"
Tailstock:
Quill Travel................................ 5 1/2"
Quill - Graduation.......................... 1/16"
Morse Taper Center.......................... #3
Morse Taper w/ Tang Type Quill.............. #3
Tailstock Set-Over for Taper Turning........ 9/16"
Drive: Infinitely Variable Speed
Dimensions:
Length ..................................... 79"
Width ...................................... 33"
Height ..................................... 52"
Weight ..................................... 1870 LBS
Features & Equipment:
10" Precision SCA 3-Jaw Chuck
#3 MT Drill Chuck
Quick Change Tool Post with Holder
Precision Ground Ways
Two Prismatic V-Ways
Two Flat Flame Hardened Ways
1 5/8" Hole Thru Spindle
D1-4 Spindle Nose
5 HP Motor
Infinitely Variable Speed Drive
Flame Hardened Bed-Ways
Pull-Out Chip Pan
1 1/8" 8 Acme Lead Screw
#3 MT Tang Type Tailstock Quill
Metric Transposing Gears
Magnetic Low Voltage Controls