New old stock, very slight surface rust, was then cleaned and oiled. This Chuck has been in a clean, dry, stable environment since 1984. That' s more than we can say about most of my high school gr...

ACER DYNAMIC "21S" SERIES HIGH SPEED PRECISION LATHE

Length - 12inch, Diameter - 1(3/4)inch, Insert Size - (3/8)inch, Weight - 6LBS, (137), (4)

Length - 13inch, Diameter - 1(3/4)inch, Insert width - (3/8)inch, Weight - 7LBS, (188), (4)

Length - 12(1/8)inch, Diameter - 3(3/4)inch, Cutting Diameter - 3(1/32)inch, Weight - 10LBS

Length - 8(1/4)inch, Diameter - 2(3/4)inch, Weight - 3LBS, (3-79), (5MT5), (LTC)

Tool Length - 10(5/8), Retention Knob - 9inch, Diameter - 4inch, Cutting Diameter - 3(15/16)inch, Weight - 20LBS,

Cutting Diameter - 7inch(Widest point), Height 2(3/8)inch, Weight - 15LBS, R.H. Whisper-cut, Rapid Set, (2B-58139), (STD-29431), 9/84

Length - 10(1/2)inch, Diameter - 3(15/16)inch, Weight - 8LBS, Patent No. - 2.330.692, Others Pendng - 3536-1-12

Length - 8(3/4)inch, Diameter - 3(3/4)inch, Insert Diameter - 2inch, Weight - 10LBS

Length - 13(1/4)inch, Diameter - 4(1/16)inch, Cutting Diameter - 3(3/16)inch, Weight - 17LBS, Wedge - 81010, Toolhead - (ZN3M.0304.2190.R.H), Toolholder - Unknown

Length - 8(1/2)inch, Diameter - 5(3/4)inch, Weight - 21LBS, Cutting Head - Greenleaf Corp. 5Inch cutting diameter, (ETRP), R.H. (5318R), Insert - TPCN-53N8

Height - 8inch, Diameter - 5inch, Weight - 15LBS, 8 Teeth, (LTC 11-80), (671C04R01), (50ST6)

Length - 14inch, Diameter - 3(15/16)inch, Weight - 14LBS, Insert Diameter - 1(1/4)inch, Endmill included

Length - 15inch, Diameter - 3(3/4)inch, Weight - 15LBS,

Length - 10(1/2)inch, Diameter - 3(15/16)inch, Weight - 17LBS, 28 Teeth

Length - 11(1/2)inch, Diameter - 3(7/8)inch, Weight - 15LBS, (22J 350445 R 01), Blade No. - (625-141538-01) Wedge No. - (1M433R01) and (1M433R02)

Total Length - 9(1/4)inch, Total Diameter - 7inch, Weight - 25LBS, This is a Kennametal Toolholder with a Cyclone Cutting head. Kennametal Holder - (158641CB5), Kennametal screw - (KLS20)(S4CE4), C...

Diameter - 4(1/16)inch, Height - 2(3/8)inch, Weight - 5LBS, (ZP1M-0406RH), Wedge# - 80909-1, (RB-12), (R-5043), 6 teeth

Length - 11(5/8)inch (Endmill included), Diameter - 3(3/4)inch, Insert Diameter - (5/8)inch, Weight - 5LBS

Diameter - 6(7/8)inch, 6(3/8)inch from tooth to tooth, 13LBS, 10 teeth, (RA265.2-160M), (815832), Wedge# - 265.2-826

Length - 8inch, Diameter - 3(7/8)inch, Insert Diameter - 1(3/4)inch, Weight - 10LBS

Length - 10(1/4)inch, Diameter - 3(7/16)inch, Insert Diameter - 1(1/2)inch, Weight - 9LBS

Length - 7(5/8)inch, Diameter - 3(3/4), Insert Diameter - 1(3/4)inch, Weight - 9LBS

Length - 13(3/8)inch, Diameter 1(3/4), Insert hole - (3/8)inch, Weight - 6LBS

Length - 8(5/8)inch, Diameter - 2(19/36)inch, insert diameter - 1(11/16)inch, 6LBS

2-5 morris taper, drill included, Length - 10(1/4)inch, Diameter - 1(3/4), 4LBS

Length - 9(1/2)inch, diameter - 1(33/36)inch, insert diameter - 1(1/4)inch, 4LBS, 60443

Length - 8(1/2)inch, Diameter - 1(7/16)inch, insert diameter - (15/16)inch, Weight - 3LBS, 60433

Length - 7(5/8)inch, Diameter - 1(7/16)inch, Insert Diameter - 1inch, 3LBS, 777769