Filters
Sort By
2" x 14 1/2" Boring Bar
9" Webster & Bennett (TYPE) Chuck Jaws (Set Of 4)
TOOLING & ACCESS._See also Specific CategoriesStock #: 11670
Used - Excellent
9" Webster & Bennett (TYPE) Chuck Jaws (Set Of 4) Fit Models 48", 60", 72" Webster & Bennett machines
2 1/8" Cutting diameter
1 13/16" Cutting diameter
This is the Holder for Boring Bar 11633 Length - 4(3/4)" Width - 5(3/4)" Height - 3(3/8)" Diameter - 2(1/32)" Weight - 17 lbs
90 degree angle, 3 T-slot angle plate
TOOLING & ACCESS._See also Specific CategoriesStock #: 11630
Used - Good
90 degree angle, 3 T-slot angle plate 4 securing holes Length............ 15 15/16inch Height.............8inch Width............. 6inch Face Dimensions...........15 15/16inch x 8inch Weighs 58LBS ...
Expands..............0 - 6 1/8 inch Height.......... 7 1/16 inch Length......... 17 1/2 inch Width.........7 1/2 inch 4 bolt holes to secure to machine table Weighs...........82LBS as is
ANGLE PLATES, 33" x 106" SLOTTED HEAVY DUTY, SET OF TWO, FOUR PEICES, VERY NICE
SUPER HEAVY DUTY BORING MILL JAWS
TOOLING & ACCESS._See also Specific CategoriesStock #: 10661
Used - Good
SET OF (4) JAWS, BORING MILL, 4" WIDE JAW, 8"LONG, 3 1/2" TALL, 7" X 6 1/4" BOLT
1 3/4" Cutting diameter
14 1/8" x 2 1/4" BORING BAR B 3618 J
TOOLING & ACCESS._See also Specific CategoriesStock #: 11667
Used - Good
2 1/2" cutting diameter
14 1/8" x 2 1/4" BORING BAR B 3618 J
TOOLING & ACCESS._See also Specific CategoriesStock #: 11666
Used - Good
2 1/2" cutting diameter
Boring depth is 13 3/4" with a cutting diameter of 2 3/8"
3 3/16" x 15 7/8" Boring Bar
TOOLING & ACCESS._See also Specific CategoriesStock #: 11686
Used - Excellent
Boring Depth is 15 7/8" with a 3 3/16" diameter
TOOL HOLDER, HEAVY DUTY BORING BAR HOLDER
TOOLING & ACCESS._See also Specific CategoriesStock #: 11245
Used - Excellent
3" Boring bar holder, Custom machined holder, pairs well with SANDVICK BORING BAR ITEM # 10921
7/8" cutting tool insert
1 5/8" x 15 3/4" BORING BAR
TOOLING & ACCESS._See also Specific CategoriesStock #: 11649
Used - Excellent
1 7/8" Cutting diameter
1 7/8" Cutting diameter
1 3/4" Cutting diameter
C.C Craley Co. adjustable taper 50 tool holder, model 4811
TOOLING & ACCESS._See also Specific CategoriesStock #: 11518
Used - Excellent
C.C Craley Co. adjustable taper 50 tool holder, Model 554
TOOLING & ACCESS._See also Specific CategoriesStock #: 11515
Used - Excellent
Model: SI-SKNR-48-5H Indexable Carbide Insert, 3" Dia. 22" OAL Thru Coolant Hole, Bleck Oxide
Carboloy 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 4)
TOOLING & ACCESS._See also Specific CategoriesStock #: 11698
Used - Good
*Photos in same order as in Specifications
CARLTON PRECISION TILTING, T-SLOTTED, HEAVY DUTY BOX TABLE
TOOLING & ACCESS._See also Specific CategoriesStock #: 11411
Used - Excellent
This Carlton tilting box table is – 24” Wide x 20” Deep x 20” High, T-Slotted on Top & Face, Tilts 0-90 Deg. Swivels 360 Deg. Maybe made by Carlton no ID?
ANGLE PLATES, 48" TALL, 14" WIDE, 18" DEEP, HEAVY DUTY BOX WELD CONSTRUCTION
COLLIS 40 TAPER TOOL HOLDER, SET OF 3
TOOLING & ACCESS._See also Specific CategoriesStock #: 11600
Used - Excellent
Collis 40 taper tool holders, set of 3 Model 67691.......... .500EM, 2.63ProN8, 40CV Model 67691.......... .500EM, 2.63ProX7, 40CV Model 67692.......... .625EM, 3.75ProX7, 40CV Shipped in box........
COOL JET HIGH PRESSURE COOLANT SYSTEM
TOOLING & ACCESS._See also Specific CategoriesStock #: 10749
Used - Good
COOLANT SYSTEM, COOL JET, FLOW RATE 8GPM, 1000 PSI / 70 BAR, 20 FOOT HOSE
Criterion Co. adjustable taper 50 tool holder, model CB3 CV50
TOOLING & ACCESS._See also Specific CategoriesStock #: 11521
Used - Excellent
3" Thru Hole & A8 Back