Filters
Sort By
Select option
UNKNOWN Boring Bar TOOLING & ACCESS._See also Specific Categories | TR Wigglesworth Machinery Co.
20" Over All Length 2 3/4" Diameter Tool Slot 1/2"
WEBSTER & BENNETT boring bar TOOLING & ACCESS._See also Specific Categories | TR Wigglesworth Machinery Co.
5" Diameter 17 3/4" Over All Length 12 3/4" Boring Bar Length Turret Interface 3" x 5" (serrated) Accepts 1 1/4" square Tooling W/ Two (2) Allen Keys Locks "AS IS" Skidded Strapped & Wrapped
WEBSTER & BENNETT boring bar TOOLING & ACCESS._See also Specific Categories | TR Wigglesworth Machinery Co.
5" Diameter 17 5/8" Over All Length 12 5/8" Boring Bar Length Turret Interface 3" x 5" (serrated) Accepts 1 1/4" square Tooling W/ Two (2) Allen Keys Locks "AS IS" Skidded Strapped & Wrapped
2007 MAZAK QT250 NEXUS MS LATHES, COMBINATION, N/C & CNC | TR Wigglesworth Machinery Co.
MAZAK QT250 NEXUS MS, MAZATROL 640T,10"Chk, 3", 2007, SUB SPINDLE, PARTS CATCH
26.0in
Swing
21.0in
Machining Length
3.0
# Axis
10.0in
Chuck Size
2007 MORI SEIKI NL-2500SY/700 LATHES, COMBINATION, N/C & CNC | TR Wigglesworth Machinery Co.
30" Swing, 14.4" Turning Capacity, 27.5" Turning Length, Mori-Seiki 850 MX III CNC Control with MAAPS System Chip Blaster High Pressure Mayfran Chip converor
30.0in
Swing
27.5in
Machining Length
3.0
# Axis
10.0in
Chuck Size
1998 MIYANO JNC-45 LATHES, COMBINATION, N/C & CNC | TR Wigglesworth Machinery Co.
1 13/16" Bar Capacity MASTER COLLET SINGLE TUBE BARFEED FANUC OT CNC CONTROL COOLANT SYSTEM PARTS CATCHER
--
Swing
--
Machining Length
--
# Axis
8.0in
Chuck Size
WEBSTER & BENNETT 641 & 642 MACHINE PARTS | TR Wigglesworth Machinery Co.
WEBSTER & BENNETT Model "DH" VTL's, Pertaining to the Cross Slide End Bracket Assemblies. Part #642 Adjusting Screw and Part #641 Nut for adjusting Screw for NO.33 Spring. Note: This Proposal co...
WEBSTER & BENNETT 641 & 642 MACHINE PARTS | TR Wigglesworth Machinery Co.
WEBSTER & BENNETT Model "DH" VTL's, Pertaining to the Cross Slide End Bracket Assemblies. Part #642 Adjusting Screw and Part #641 Nut for adjusting Screw for NO.33 Spring. Note: This Proposal co...
1978 WEBSTER & BENNETT "EV" BORING MILLS, VERT. (Including Vert. Turret Lathes) | TR Wigglesworth Machinery Co.
54" Webster & Bennett Series EV Vertical Boring & Turning Machine w/ Extra Height Under Rail and 40 HP Main Motor & Controls
WEBSTER & BENNETT WB 8400-236 Thrust Journal MACHINE PARTS | TR Wigglesworth Machinery Co.
Webster & Bennett Leadscrew Assembly Parts We strongly advise to order these parts when ordering a new horizontal leadscrew and adjusting nuts.
WEBSTER & BENNETT WB 8222-125 Oilite Bushing MACHINE PARTS | TR Wigglesworth Machinery Co.
Webster & Bennett Leadscrew Assembly Parts We strongly advise to order these parts when ordering a new horizontal leadscrew and adjusting nuts.
WEBSTER & BENNETT WB 8222-58 Oilite Bushing MACHINE PARTS | TR Wigglesworth Machinery Co.
Webster & Bennett Leadscrew Assembly Parts We strongly advise to order these parts when ordering a new horizontal leadscrew and adjusting nuts.
WEBSTER & BENNETT WB 8400-129 Thrust Journal MACHINE PARTS | TR Wigglesworth Machinery Co.
Webster & Bennett Leadscrew Assembly Parts We strongly advise to order these parts when ordering a new horizontal leadscrew and adjusting nuts.
2009 FRYER VB100 MACHINING CENTERS, VERT., N/C & CNC | TR Wigglesworth Machinery Co.
Features * 100" of X-Axis Travel, * 25 H.P. Spindle drive * 8000 R.P.M.
100.0in
X
35.0in
Y
36.0in
Z
25.0hp
Power
1960 WEBSTER & BENNETT "DH" BORING MILLS, VERT. (Including Vert. Turret Lathes) | TR Wigglesworth Machinery Co.
48" Diameter 4-Jaw Chuck, 53" Swing Full Coolant System Chuck Jaws Tooling Nice!
HEM 1600A SAWS, BAND, HORIZONTAL | TR Wigglesworth Machinery Co.
23" x 25" CAPACITY 5 H.P. Operators Counsel
23.0in
Rect-Cap (H)
25.0in
Rect-Cap (W)
--
Rounds-Cap
--
Square-Cap
WEBSTER & BENNETT WB NO. 33 Spring MACHINE PARTS | TR Wigglesworth Machinery Co.
WEBSTER & BENNETT WB NO. 33 TENSION SPRING Creates tension on the FEED AXIS DIRECTIONAL LEVER on the CROSS SLIDE END BRACKET ASSEMBLY of ALL MODEL D and DH and EH WEBSTER & BENNETT VTL's
WEBSTER & BENNETT _UNKNOWN_ MACHINE PARTS | TR Wigglesworth Machinery Co.
WEBSTER BENNETT, OIL FILTER REPLACEABLE ELEMENT (NEW IN BOX) SPECIFY MODEL
LOGAN 1140010-D14H LATHES, ENGINE_See also other Lathe Categories | TR Wigglesworth Machinery Co.
* 1 5/8" Hole Through Spindle * D1-4 Spindle Nose * Pull Out Chip Pan * #3 M.T. Tail Stock Quill * Flame Hardened Bed Ways * 5 H.P. Main Drive * Infinitely Var...
14.0in
Swing
42.0in
Centers
158.0in
Spindle Bore
5.0hp
Power
2000 FADAL 4020A HT MACHINING CENTERS, VERT., N/C & CNC | TR Wigglesworth Machinery Co.
CAT 40, 21 Tools , Rigid Tapping, High Speed CPU, Graphics, 422K Memory Expansion,
40.0in
X
20.0in
Y
20.0in
Z
20.0hp
Power
DO-ALL C 9-16 SAWS, BAND, HORIZONTAL | TR Wigglesworth Machinery Co.
9" x 16" Capacity 105 - 275 FPM Vari-Speed Coolant System Recirculating Thru Blade Guide Color...….Continental Green
9.0in
Rect-Cap (H)
16.0in
Rect-Cap (W)
10.75in
Rounds-Cap
--
Square-Cap
2014 KENT KGS-84 AHD GRINDERS, SURFACE, RECIPROC. TABLE (HOR. SPDL.) | TR Wigglesworth Machinery Co.
KENT Model: KGS-84 AHD (New in 2014) 16" x 32" Variable Hold Electro-Magnetic Chuck Hydraulic Over the Wheel Dresser W/ "NEW" Cartridge with Diamond tip Magnetic Coolant Separation Dust Collectio...
32.0in
Table-W
16.0in
Table-L
Horz
Horz/Vert
7.5hp
Power
2001 ENOMOTO LVT-300HR TOOLING & ACCESS._See also Specific Categories | TR Wigglesworth Machinery Co.
ENOMOTO HEAVY DUTY CHIP CONVEYOR MODEL No. LVT-300HR, BUILT IN 2001, The condition of this unit is Excellent!
Sub Table Cast Steel TOOLING & ACCESS._See also Specific Categories | TR Wigglesworth Machinery Co.
SUB TABLE, CAST STEEL, MILL, 32 " WIDE X 48" LONG X 8" TALL, T-SLOTTED, EXCELLENT
WEBSTER & BENNETT WB 2372 MACHINE PARTS | TR Wigglesworth Machinery Co.
WEBSTER & BENNETT "Reclaimed" Horizontal Bevel/MITRE Gear, 45Tooth Horizontal. This is the (normal speed) horizontal gear as it relates to the "Vertical Pinion Shaft Arrangement" as described in ...
1999 KURAKI KBT-11W BORING MILLS, HORIZ., TABLE TYPE, N/C & CNC | TR Wigglesworth Machinery Co.
Kuraki KBT-11W CNC Horizontal Boring Mill
WEBSTER & BENNETT T39.74 TOOLING & ACCESS._See also Specific Categories | TR Wigglesworth Machinery Co.
8" TALL CHUCK JAWS SET OF FOUR (4), WEBSTER & BENNETT, 3 STEP, WILL FIT 48", 60" & 72" VTL'S
WEBSTER & BENNETT T39.40/1 TOOLING & ACCESS._See also Specific Categories | TR Wigglesworth Machinery Co.
8" TALL CHUCK JAWS SET OF FOUR (4), WEBSTER & BENNETT, 3 STEP, WILL FIT 36" VTL'S
WEBSTER & BENNETT WB 455 MACHINE PARTS | TR Wigglesworth Machinery Co.

Webster Bennett Lockut

MACHINE PARTS
Stock #: 11426
Used - Needs Work
(1) WB 455 Locknut for Adjusting Saddle Nuts WB 730/731 Quantity of (2) Required NOTE: THIS PARTICULAR UNIT IS VERY WELL USED, THE HOLES ARE DRILLED THRU