WEBSTER & BENNETT

Largest chuck jaws made by Webster & Bennett that fit a 48", 60", 72" , 96", 120", and 144" Webster & Bennett machine.

3" x 13 3/4" WEBSTER & BENNETT BORING BAR WITH INTERCHANGEABLE KENNAMETAL H40-DTFNL4W CUTTING HEAD

WEBSTER BENNETT, OIL FILTER REPLACEABLE ELEMENT (NEW IN BOX) SPECIFY MODEL

Webster and Bennett, VTL, 18" OAL. Thinner shaft length - 12(7/8)" Thinner shaft diameter - 2(3/8)" Thick end length - 5(1/8)" with 11slots 2(3/4) in length Thick end diameter - 3" Insert rest - (5...

CHUCK SLIPPER, WEBSTER BENNETT, VTL,

CHUCK SCROLLS, WEBSTER BENNETT, VTL,

WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, (MODIFIED) , 48", 60" & 72" VTL'S

WEBSTER & BENNETT, BORING BAR, FITS 36" VTL

WEBSTER & BENNETT, CHUCK WRENCH, FITS 36", 48", 60" AND 72", 96", 120, VTL'S

WEBSTER BENNETT 3"X 12", RIGHT BORING BAR,FOR VTL, FITS 36", 48", 60" & 72"

WEBSTER BENNETT LEFT BORING BAR 3" X 12", FOR VTL FITS 36", 48", 60" & 72"

ADVANCED TOOL HOLDING SYSTEM, WEBSTER BENNETT, Fits - B2X Tool HOLDERS

WEBSTER & BENNETT, BORING BAR, FITS 48" 60" & 72, 11" LONG x 3" DIAM

WEBSTER & BENNETT, BORING BAR, FITS 36" VTL'S,

WEBSTER & BENNETT TURRET TYPE < BORING BAR > FITS 48", 60" & 72" VTL'S

WEBSTER & BENNETT TURRET TYPE < BORING BAR > FITS 36" VTL'S

WEBSTER & BENNETT < RECHARGE KIT > NITROGEN GAS COUNTER BALANCE RAM VTL,(RENTAL)

WEBSTER & BENNETT < CONTROL PANEL COVER> "GIVE YOUR WEBSTER A FACE LIFT"

Total Length........30 1/2" Shaft Length........24 15/16" Shaft Diameter...........1 1/4" 21 Teeth on gear Weighs 17LBS

TURRET ASSEMBLY, WEBSTER BENNETT, VTL, TURRETT BINDER, TURRETT STEM, INDEXING

Item 1205 WEBSTER & BENNETT WORM GEAR Fits a variety of model and sizes. Note: This is an O.E.M. Webster & Bennett "New Old Stock" Part. The unit is in Excellent condition. Offered "As, Is". 6" x ...

Item 121 MITRE (N.S, H.S, and S.H.D. Drives only and L.S. Drive when screw cutting attachment if fitted. Item 122 Safty Clutch

3 1/4" CHUCK JAWS (4) WEBSTER BENNETT, 36" VTL, MODEL 430 RECLAIMED W/ HARDWARE

3 1/4" CHUCK JAWS (4) WEBSTER BENNETT, 36" VTL'S ONLY, MODEL 430 RECLAIMED

Webster and Bennett chuck screw

(NEW) WEBSTER BENNETT CHUCK SCREW, Original Equipment Manufacturer, Set of Four (4)

Part # 505 Fits 36" MACHINES ONLY WITH 5-POSITION TURRETS Part # 757 Fits 48", 60, 72, 96, MACHINES With 5-Position Turrets.

WEBSTER & BENNETT Model "DH" VTL's, Pertaining to the Cross Slide End Bracket Assemblies. Part #642 Adjusting Screw and Part #641 Nut for adjusting Screw for NO.33 Spring. Note: This Proposal co...

WEBSTER & BENNETT Model "DH" VTL's, Pertaining to the Cross Slide End Bracket Assemblies. Part #642 Adjusting Screw and Part #641 Nut for adjusting Screw for NO.33 Spring. Note: This Proposal co...