TOOLING & ACCESS._See also Specific Categories

2" x 14 1/2" Boring Bar

9" Webster & Bennett (TYPE) Chuck Jaws (Set Of 4) Fit Models 48", 60", 72" Webster & Bennett machines

2 1/8" Cutting diameter

1 13/16" Cutting diameter

This is the Holder for Boring Bar 11633 Length - 4(3/4)" Width - 5(3/4)" Height - 3(3/8)" Diameter - 2(1/32)" Weight - 17 lbs

90 degree angle, 3 T-slot angle plate 4 securing holes Length............ 15 15/16inch Height.............8inch Width............. 6inch Face Dimensions...........15 15/16inch x 8inch Weighs 58LBS ...

Expands..............0 - 6 1/8 inch Height.......... 7 1/16 inch Length......... 17 1/2 inch Width.........7 1/2 inch 4 bolt holes to secure to machine table Weighs...........82LBS as is

SET OF (4) JAWS, BORING MILL, 4" WIDE JAW, 8"LONG, 3 1/2" TALL, 7" X 6 1/4" BOLT

1 3/4" Cutting diameter

2 1/2" cutting diameter

2 1/2" cutting diameter

Boring depth is 13 3/4" with a cutting diameter of 2 3/8"

Boring Depth is 15 7/8" with a 3 3/16" diameter

3" Boring bar holder, Custom machined holder, pairs well with SANDVICK BORING BAR ITEM # 10921

7/8" cutting tool insert

1 7/8" Cutting diameter

1 7/8" Cutting diameter

1 3/4" Cutting diameter

3 H.P. REPLACEMENT MILLING HEAD (NEW), ACER "E-MILL" , MILLING MACHINE UPGRADE

5 H.P. REPLACEMENT MILLING HEAD (NEW), ACER "E-MILL" , MILLING MACHINE UPGRADE

Model: SI-SKNR-48-5H Indexable Carbide Insert, 3" Dia. 22" OAL Thru Coolant Hole, Bleck Oxide

*Photos in same order as in Specifications

This Carlton tilting box table is – 24” Wide x 20” Deep x 20” High, T-Slotted on Top & Face, Tilts 0-90 Deg. Swivels 360 Deg. Maybe made by Carlton no ID?

Collis 40 taper toolholders, set of 3 Model 67691.......... .500EM, 2.63ProN8, 40CV Model 67691.......... .500EM, 2.63ProX7, 40CV Model 67692.......... .625EM, 3.75ProX7, 40CV Shipped in box.........

COOLANT SYSTEM, COOL JET, FLOW RATE 8GPM, 1000 PSI / 70 BAR, 20 FOOT HOSE

3" Thru Hole & A8 Back