MARVEL 81A-PCII HEAVY DUTY VERTICAL BAND SAW w/ SPECIAL FIXTURE FOR CUTTING

YEAR: 1997
MODEL: 81A-11PC HEAVY DUTY PC CONTROLLED
NOTE: PLEASE SEE OUR VIDEO

SPECIFICATIONS (WITHOUT FIXTURE):

CAPACITY:
RECTANGLE ROUNDS
BLADE AT 45 DEG. R.................... 18" X 13 1/2" 13"
BLADE AT 45 DEG. L.................... 18" X 11 1/2" 13"
NOMINAL............................... 18" X 20" 18"
CAPACITY HIGH COLUMN:
NOMINAL............................... 18" X 25" 18"
BLADE AT 45 DEG. R.................... 18" X 17" 16 1/2"
BLADE AT 45 DEG. L.................... 18" X 15" 17"
BLADE:
LENGTH & WIDTH........................ 14'6" x 1 1/4"
GAUGE................................. .042
BLADE HIGH COLUMN:
LENGTH & WIDTH........................ 15'6" X 1 1/4"
GAUGE................................. .042

WORKING SURFACE....................... 30" X 27"
VISE OPENS MAXIMUM.................... 21 1/2"
BLADE SPEED........................... 60 - 400 FPM
FEED RATE............................. 0 - 300 LBS
MOTOR................................. 10 HP 1800 RPM
APPROX. OVERALL HEIGHT................ 94 3/4"
APPROX. FLOORSPACE REQUIRED........... 182 5/8" X 108"
APPROX. WEIGHT........................ 8,000 LBS

PCII PROGRAMMABLE MICRO-PROCESSOR CONTROL FEATURES:

PROGRAMMING MODES:
* MANUAL-QUICKLY AND EASILY PROGRAM AND RUN SIMPLE CUTTOFF JOBS
* AUTOMATIC-EASILY PROGRAM AND RUN COMPLES, MULTIPLE STEP JOBS AND SAVE THEM
IN PCII'S MEMORY
* REMOTE DOWN-LOADING-PROGRAM THE PCII FROM REMOTE, CABLE LINKED DOS OR
WINDOWS PC RUNNING THE OPTIONAL CUTTING EDGE SOFTWARE. THIS ELIMINATES
PROGRAMMING BY THE SAW OPERATOR
* JOB REQUEST - WITH THE PCII'S KEYBOARD, THE OPERATOR CAN REQUEST JOBS FROM
A REMOTE, CABLE LINKED DOS OR WINDOWS PC RUNNING THE OPTIONAL CUTTING EDGE
SOFTWARE

PCII FEATURES:
* AUTOMATICALLY COMPENSATES FOR BLADE KERF AND TILT AXIS OFFSETS
* EASE OF OPERATION
* BUILT-IN SELF-TEST DIAGNOSTICS
* INCH AND METRIC CAPACILITY
* STORES AS MANY AS 99 JOBS IN MEMORY
* PROGRAM ONE JOB WHILE RUNNING ANOTHER

SPECIAL SEGMENTAL TIRE MOLD CUTTING TABLE:
FEATURING HYDRAULICALLY ACTUATED ELEVATING ROLLERS FOR INDEXING TIRE MOLDS

TABLE SIZE: 69 5/16" X 65"
2 ALIGNMENT GUIDE AND HOLD DOWN CLAMPS
DESIGNED SPECIFICALLY TO ACCOMIDATE 36" DIAMETER TIRE MOLDS 11" IN HEIGHT,
WEIGHING APPROXIMATELY 1200 LBS TO 55" DIAMETER TIRE MOLDS 15" IN HEIGHT,
WEIGHING APPROXIMATELY 3500 LBS

INCLUDES:

OPERATORS, INSTALLATION, MAINTENANCE AND EXPLODED ASSEMBLIES MANUAL
PCII MICROPROCESSOR CONTROL LADDER DIAGRAM FOR SEGMENTAL TIRE MOLD OPERATIONS
ORIGINAL ASSEMBLY DRAWINGS
HYDRAULIC AND ELECTRICAL SCHEMATICS
PROGRAMMABLE CONTROLLER INSTALLATION GUIDE

SPECIFICATIONS SUBJECT TO VERIFICATION