FEATURES:

* THE 22" SERIES IS AVAILABLE IN 40", 60", 80", 100", 120" AND 160"
DISTANCE BETWEEN CENTERS
* 3.34" SPINDLE BORE WITH D1-8 SPINDLE NOSE
* 10 HP SPINDLE MOTOR FOR 220V / 440V / 3 PHASE / 60 HZ WIRING
* SPINDLE SPEED 15 - 1500 RPM FOR 3.34" BORE; OPT. 10 - 1000 RPM FOR
4.53" BORE
* AUTO. FEED & THREADING ARE INTERLOCKED TO PREVENT SIMULTENEOUS
FUNCTIONS
* THERMAL TREATED MEEHANITE CASTING BED; BED HARDNESS REACHES HS70
* HEAT TREATED AND PRECISION GROUND ALLOY GEARS
* UNIVERSAL GEARBOX FOR BOTH INCH/METRIC THREAD & CONVERSION CHART
* AUTOMATIC LONGITUDINAL MULTIPLE FEED STOP
* BED WIDTH 15.7"

SPECIFICATIONS:
GENERAL CAPACITY:
SWING OVER BED................................... 22"
SWING OVER GAP................................... 31"
SWING OVER CROSS SLIDE........................... 13.4"
DISTANCE BETWEEN CENTERS......................... 39.4"/59.1"/78.7"
98.4"/118.1"/157.5"
WIDTH OF BED..................................... 15.7"
MAIN SPINDLE:
SPINDLE NOSE..................................... D1-8 / D1-11 (OPT.)
SPINDLE BORE DIAMETER............................ 3.3" / 4.5" (OPT.)
TAPER OF SPINDLE BORE............................ MT 7
SPINDLE SPEEDS (12 STEPS)........................ 10 - 1000 RPM
THREADING:
INCH THREAD RANGE................................ 2 - 56 TPI
METRIC THREADS RANGE............................. P 0.5 - P 14
LONG. FEEDS RANGE................................ 0.002" - 0.03"
CROSS FEEDS RANGE................................ 0.0008 - 0.02"
LEADSCREW DIAMETER............................... 1.5"
LEADSCREW PITCH.................................. 4 TPI OR 0.2"
TAPER OF TAIL CENTER............................. MT 5
CARRIAGE:
COMPOUND REST TRAVEL............................. 7.9"
CROSS SLIDE TRAVEL............................... 14.8"
TAILSTOCK:
TAIL SPINDLE DIAMETER............................ 3.3"
TAIL SPINDLE TRAVEL.............................. 6.5"
POWER:
MAIN DRIVE MOTOR................................. 10 HP
COOLANT PUMP MOTOR............................... 1/8 HP

STANDARD ACCESSORIES:

12" D1-11 THREE JAW CHUCK FOLLOWABLE SPLASH GUARD
STEADY REST: BRONZE TIP BUILT-IN COOLANT SYSTEM
(3.14" - 10.62") 4-WAY TOOL POST
LONGITUDINAL CARRIAGE STOP TOOL BOX W/ TOOLS
HALOGEN WORK LIGHT

OPTIONAL ACCESSORIES (ADDITIONAL):

1. UPGRADE TO 4.53" BORE (D1-11 NOSE W/ 15 HP SPINDLE MOTOR
2. 20" 4-JAW INDEPENDENT CHUCK (4.53" SPINDLE BORE)
3. FOLLOW REST: BRONZE TIP (0.78" - 3.93")
4. 20" FACE PLATE (D1-11)
5. "ALORIS" TOOL POST & 4 HOLDERS (#5-BS)
6. "ALORIS" TOOL POST & 6 HOLDERS (#5-SET)
7. "DORIAN" TOOL POST & 4 HOLDERS (SD50 DA-TS)
8. MICROMETER STOP
9. FOUR POSITION CARRIAGE STOP
10. TAPER TURNING ATTACHMENT
11. INSTALLATION FEE FOR TAPER TURNING ATTACHMENT
12. 5C COLLET CLOSER (LEVER-TYPE)
13. INSTALLATION FEE FOR COLLET CLOSER
14. 5C COLLET SET (1/16" - 1 1/16" x 16THS; 17 PCS/SET)
15. "MAGNESCALE" 2-AXIS DRO (12" X 40"/60"/80")
(12" X 100"/120"/160")
16. "NEWALL" 2-AXIS DRO (14" X 40"/60"/80")
(14" X 100"/120"/160")

** ABOVE PRICES ARE BASED ON F.O.B. PISCATAWAY, NJ
** PRICES AND DESIGNS ARE SUBJECT TO CHANGE WITHOUT NOTICE
** MANUFACTURER RESERVES THE RIGHT TO MODIFY THE DESIGN WITHOUT NOTICE