MITEK CM2 UNIVERSAL TOOL & CUTTER GRINDER
GRINDERS, TOOL & CUTTER
CAPACITY
Workhead:
Swing over main slide, max dia.......... 12" (304mm)
Collet work dia. max.......... 1.25" (31mm)
min.......... 0.12
Lead generated by spiral lead mechanism min..........1.81" (45mm)
Length between spindle nose and tail center max.......... 6" (152mm)
Wheelhead:
Grinding wheel dia. max..........4" (101mm)
RANGE
Workhead:
Main slide travel.......... 5.75" (146mm)
Offset slide travel total.......... 5.25" (133mm)
front of center.......... 3" (76mm)
rear of center.......... 2.25" (57mm)
Workhead angular adjustment:
Horizontal plane (turntable base).......... 235 Deg.
Vertical plane above center.......... 40 Deg.
below center.......... 40 Deg.
Wheelhead:
Longitudinal slide travel.......... 6" (152mm)
Vertical slide travel total.......... 9.50" (241mm)
Above center.......... 4.50" (114mm)
Below center.......... 5" (127mm)
Crosslide travel total.......... 7.50" (190mm)
Front of center.......... 3" (76mm)
Rear of center.......... 4.50" (114mm)
SPINDLE SPEEDS
(+/- 0% - 8% variation allowable)
Workhead one speed.......... 436 rpm
Wheelhead three speeds.......... 4000, 5729, and 8000 rpm
(motor speer @ 3600rpm)
Internal grinding attachment (extra cost), three speeds, approx.......... 16410, 23510, and 32820 rpm
Motors, Electric
Workhead drive, AC.......... includes reverse 1/4 hp (.186 kilowatts)
Wheelhead drive, AC.......... 1/2 hp (.373 kilowatts)
FLOOR SPACE AND WEIGHT
Area of base only.......... 25" x 26" (635mm x 660mm)
Area required for machine (including swivel and overtravel movements.......... 60" x 67" (1524mm x 1701mm)
Height from floor to center of workhead spindle.......... 47.72" (1212mm)
Height overall with wheelhead raised.......... 62.12" (1577mm)
Net weight (including motors and controls).......... 1525lbs (691 kilograms)
Features & Equipment:
Halogen Work lamp
10 Collets
2 Wheel flanges
3 Wheel flange spanner wrenches
Sand wheel, drawing # 49 on page 35
Safety shield, drawing #27 on page 28
Protective shield fixing ring, drawing #26 on page 28
Gear column assembly includes drawing #52, 53, 54, 55, 56 on page 35
CAPACITY
Workhead:
Swing over main slide, max dia.......... 12" (304mm)
Collet work dia. max.......... 1.25" (31mm)
min.......... 0.12
Lead generated by spiral lead mechanism min..........1.81" (45mm)
Length between spindle nose and tail center max.......... 6" (152mm)
Wheelhead:
Grinding wheel dia. max..........4" (101mm)
RANGE
Workhead:
Main slide travel.......... 5.75" (146mm)
Offset slide travel total.......... 5.25" (133mm)
front of center.......... 3" (76mm)
rear of center.......... 2.25" (57mm)
Workhead angular adjustment:
Horizontal plane (turntable base).......... 235 Deg.
Vertical plane above center.......... 40 Deg.
below center.......... 40 Deg.
Wheelhead:
Longitudinal slide travel.......... 6" (152mm)
Vertical slide travel total.......... 9.50" (241mm)
Above center.......... 4.50" (114mm)
Below center.......... 5" (127mm)
Crosslide travel total.......... 7.50" (190mm)
Front of center.......... 3" (76mm)
Rear of center.......... 4.50" (114mm)
SPINDLE SPEEDS
(+/- 0% - 8% variation allowable)
Workhead one speed.......... 436 rpm
Wheelhead three speeds.......... 4000, 5729, and 8000 rpm
(motor speer @ 3600rpm)
Internal grinding attachment (extra cost), three speeds, approx.......... 16410, 23510, and 32820 rpm
Motors, Electric
Workhead drive, AC.......... includes reverse 1/4 hp (.186 kilowatts)
Wheelhead drive, AC.......... 1/2 hp (.373 kilowatts)
FLOOR SPACE AND WEIGHT
Area of base only.......... 25" x 26" (635mm x 660mm)
Area required for machine (including swivel and overtravel movements.......... 60" x 67" (1524mm x 1701mm)
Height from floor to center of workhead spindle.......... 47.72" (1212mm)
Height overall with wheelhead raised.......... 62.12" (1577mm)
Net weight (including motors and controls).......... 1525lbs (691 kilograms)
Features & Equipment:
Halogen Work lamp
10 Collets
2 Wheel flanges
3 Wheel flange spanner wrenches
Sand wheel, drawing # 49 on page 35
Safety shield, drawing #27 on page 28
Protective shield fixing ring, drawing #26 on page 28
Gear column assembly includes drawing #52, 53, 54, 55, 56 on page 35
