48" Webster & Bennett Model "DH" Vertical Turret Lathe and Boring Mill

SPECIFICATIONS:
DIAMETER OF CHUCK.............................................. 48"
ADMITS IN DIAMTER.............................................. 53"
MAXIMUM TURNING DIAMETER.......................................
TYPE "U" TOOL HOLDER........................................... 45"
TYPE "B2X" TOOL HOLDER......................................... 53"
ADMITS IN HEIGHT UNDER TURRET.................................. 35"
ADMITS IN HEIGHT UNDER CROSS-SLIDE............................. 24"
VERTICAL FEED OF TURRETT....................................... 26"
MAXIMUM LENGTH OF HOLE WHICH CAN BE BORED IS................... 24"
WHEN DIAMETER OF BORE EXCEEDS............................. 28"
MAXIMUM LENGTH OF HOLE WHICH CAN BE BORED IS................... 16"
WHEN DIAMETER OF BORE DOES NOT EXCEED..................... 28"
DIAMTER OF SPINDLE BORE........................................ 3.25"
HORIZONTAL FEED OF TURRET, CHUCK CENTER OUTWARDS............... 32"
DIAMETER OF TURRET HOLES....................................... 3"
TOTAL HEIGHT REQUIRED.......................................... 119"
FLOOR SPACE REQUIRED- FRONT.................................... 89"
FLOOR SPACE REQUIRED- SIDE..................................... 115"
DISTANCE FROM CHUCK CENTER TO JUNCTION FACE.................... 24.5"
DISTANCE, CHUCK CENTER TO FRONT OR CROSS SLIDE................. 15.125"
NUMBER OF SPEEDS............................................... 12
NUMBER OF FEEDS................................................ 12
DRIVING PULLEY SPEED, R.P.M.................................... 1000
HORSE POWER OF MAIN MOTOR...................................... 20
HORSE POWER OF RAPID POWER TRAVERSE MOTOR...................... 3
MINIMUM OVERALL HEIGHT FOR TRANSIT PURPOSES ONLY............... 97"
APPROX. WEIGHT (EXCLUDING ELECTRICAL EQUIPMENT)................ 19,025 LBS