ACER DYNAMIC 17 G SERIES HIGH SPEED PRECISION GEARED HEAD LATHE

FEATURES:

* 2 1/4" SPINDLE BORE WITH D1-6 CAMLOCK SPINDLE NOSE
* 7.5 HP SPINDLE MOTOR
* 12 SPINDLE SPEEDS: 50 - 1800 RPM
* AUTO. FEED & THREADING ARE INTERLOCKED TO PREVENT SIMULTANEOUS FUNCTIONS
* HARDENED AND GROUND MEEHANITE CASTING BEDWAY
* HARDENED & GROUND GEARS AND SHAFTS
* THREAD CHASING DIAL & AUTOMATIC LONGITUDINAL MULTIPLE FEED STOP
* CHUCK GUARD WITH SAFETY SWITCH
* BUILT-IN SAFETY OVERLOAD FRICTION CLUTCH
* POWER SUPPLY: 220V/3PH/60Hz

SPECIFICATIONS:

GENERAL CAPACITY:
CENTER HEIGHT........................................ 8 1/2"
SWING OVER BED....................................... 17"
SWING OVER GAP (GAP TYPE ONLY)....................... 26"
SWING OVER CROSS SLIDE............................... 9 5/8"
DISTANCE BETWEEN CENTERS............................. 40"/60"/80"
MAIN SPINDLE:
SPINDLE NOSE......................................... D1-6 OR A1-6
SPINDLE BORE DIAMETER................................ 2 1/4"
TYPE OF SPINDLE NOSE................................. MT #6
TAPER OF CENTER...................................... MT #4
SPINDLE SPEEDS (12 STEPS)............................ 50 - 1800 RPM
CARRIAGE:
CROSS SLIDE TRAVEL................................... 9 4/5"
COMPOUND REST TRAVEL................................. 7"
MAX. SIZE CUTTING TOOL............................... 1" X 1"
TAILSTOCK:
SPINDLE DIAMETER..................................... 2 1/4"
SPINDLE TRAVEL....................................... 6"
TAPER OF CENTER...................................... MT #4
BED:
BED LENGTH........................................... 76.8"/96.1"/116.5"
BED WIDTH............................................ 11 7/8"
WIDTH OF GAP......................................... 8 3/4"
THREADING & FEEDING:
SYSTEM............................................... INCH/METRIC
METRIC PITCH THREADS (22)............................ 0.5 - 7.0 MM/PITCH
INCH PITCH THREADS (36).............................. 4 - 56 TPI
MODULE PITCH THREADS (12)............................ 0.5 - 3.5 MP
DIAMETRAL PITCH THREADS.............................. 8 - 56 DP
RANGE OF LONGITUDINAL FEEDS.......................... 0.002" - 0.028"/REV
.......................... 0.05 - 0.70 MM/REV
RANGE OF CROSS FEEDS................................. 0.001" - 0.014" REV
0.025 - 0.35 MM/REV
POWER:
MAIN DRIVE MOTOR..................................... 7 1/2 HP
COOLANT PUMP MOTOR................................... 1/8 HP

FLOOR DIMENTIONS..................................... 85" X 40"

STANDARD ACCESSORIES:

10" D1-6 3-JAW CHUCK BUILT-IN COOLANT SYSTEM
4-WAY TOOL POST FULL LENGTH SPLASH GUARD
STEADY REST (0.6-7") WORK LIGHT
14" FACE PLATE GAP BED
CHUCK GUARD W/ SAFETY SWITCH TOOLBOX WITH TOOLS

SPECIAL PACKAGE AVAILABLE:
ACER DYNAMIC "17" SERIES LATHE W/STANDARD ACCESSORIES AND "NEWALL" NMS 800 2-AXIS
DRO & INSTALLED AT ACER FACILITY

OPTIONAL ACCESSORIES:

8" 3-JAW CHUCK (D1-6)
10" 4-JAW INDEPENDENT CHUCK (D1-6)
12" 4-JAW INDEPENDENT CHUCK (D1-6)
FOLLOW REST (BRONZE TIP): 0.78" - 4.3" RANGE
12" DRIVE PLATE
"ALORIS" TOOL POST & 4-HOLDER SET (#3-BS)
"ALORIS" TOOL POST & 6 HOLDER SET (#3 SET)
"DORIAN" QUICK CHANGE TOOL POST & 4-HOLDER SET (SD35CXA-TS)
MICROMETER STOP
FOUR POSITION CARRIAGE STOP
5C COLLECT CLOSER (LEVER-TYPE)
INSTALLATION FEE ON 5C COLLECT CLOSER
5C COLLECT SET (1/16" TO 1 1/16" x 16ths; 17pcs/set)
TAPER TURNING ATTACHMENT
INSTALLATION FEE ON TAPER TURNING ATTACHMENT
"MAGNESCALE" 2-AXIS D.R.O. (10" x 40"/60"/80")
"NEWALL" NMS 800 2-AXIS D.R.O. (10" x 40"/60"/80")
INSTALLATION FEE ON NEWALL DP700 D.R.O.

** ABOVE PRICES ARE BASED ON F.O.B. PISCATAWAY, NJ
** PRICES AND DESIGNS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
** MANUFACTURER RESERVES THE RIGHT TO MODIFY THE DESIGN WITHOUT NOTICE