ACER 29" Dynamic Series LATHES, ENGINE_See also other Lathe Categories | TR Wigglesworth Machinery Co.
Overview
Type:
LATHES, ENGINE_See also other Lathe Categories
Manufacturer:
ACER
Model:
29" Dynamic Series
Condition:
New - In-Stock
Stock #:
8106
Status:
For Sale
Description

ACER DYNAMIC 29" SERIES

Specifications

FEATURES: * THE 29" SERIES IS AVAILABLE IN 60", 80", 120", AND 160" DISTANCE BETWEEN CENTERS * 15 HP SPINDLE MOTOR * HARDENED AND GROUND MEEHANITE CASTING BEDWAY * HARDENED AND GROUND GEARS AND SPINDLE * 12 SPINDLE SPEEDS (25-1,200 RPM) * HEADSTOCK WITH MAGNETIC CLUTCH & ELECTRIC BRAKE * D1-11 CAMLOCK WITH 4-1/8" SPINDLE BORE * RAPID CROSSFEED & CARRIAGE TRAVERSE SPECIFICATIONS: GENERAL CAPACITY: CENTER HEIGHT.................................... 14 3/4" SWING OVER BED................................... 29 1/8" SWING OVER GAP (GAP TYPE ONLY)................... 37 25/32" SWING OVER CROSS SLIDE........................... 20 1/2" DISTANCE BETWEEN CENTERS......................... 60"/80"/120"/160" MAIN SPINDLE: SPINDLE NOSE..................................... ASA 1-11 OR D1-11 SPINDLE BORE DIAMETER............................ 4 1/11" TYPE OF SPINDLE NOSE............................. 108 X 1:12 TAPER OF CENTER.................................. MT 5 SPINDLE SPEEDS (12 STEPS)........................ 25 - 1200 RPM CARRIAGE: CROSS SLIDE TRAVEL............................... 18 1/4" COMPOUND REST TRAVEL............................. 9" MAX. SIZE CUTTING TOOL........................... 1" X 1" TAILSTOCK: SPINDLE DIAMETER................................. 3 1/32" SPINDLE TRAVEL................................... 7" TAPER OF CENTER.................................. MT 5 BED: BED LENGTH....................................... 102"/122"/164"/205" BED WIDTH........................................ 16 1/2" WIDTH OF GAP..................................... 14 3/16" THREADING & FEEDING: SYSTEM........................................... INCH/METRIC METRIC PITCH THREADS (31)........................ 0.5 - 14 MM INCH PITCH THREADS (45).......................... 2 - 56 TPI MODULE PITCH THREADS (23)........................ 0.25 - 7 MP DIAMETRAL PITCH THREADS (43)..................... 4 - 112 DP RANGE OF LINGITUDINAL FEEDS...................... 0.0012 - 0.0287 IPR 0.03 - 0.73 MM/REV RANGE OF CROSS FEEDS............................. 0.0004 - 0.0118 IPR 0.01 - 0.03 MM/REV POWER: MAIN DRIVE MOTOR................................. 15 HP RAPID TRAVERSE MOTOR (OPTIONAL).................. 1/2 HP COOLANT PUMP MOTOR............................... 1/8 HP STANDARD ACCESSORIES: 20" D1-11 FOUR JAW CHUCK 20" FACE PLATE 16" DRIVE PLATE BUILT-IN COOLANT SYSTEM 4-WAY TOOL POST LONGITUDINAL CARRIAGE STOP CHUCK GUARD W/ EMERGENCY STOP HALOGEN WORK LIGHT 12" ADAPTOR PLATE TOOLBOX W/TOOLS FOLLOW REST ONE STEADY REST (3.1"-9.5" LONG TIP, BEARING TYPE) (7.8"-14.5" SHORT TIP, BEARING TYPE) FOLLOWABLE SPLASH GUARD (34" WIDE) (60", 80" W/ FULL LENGTH SPLASH GUARD) PRICING: DYNAMIC 2960G DYNAMIC 2980G DYNAMIC 29120G DYNAMIC 29160G OPTIONAL ACCESSORIES (ADDITIONAL): 1. 24" 4-JAW INDEPENDENT CHUCK (D1-11) W/ DIRECT MOUNT 2. FOLLOW REST (0.4"-3.4") 3. FACE PLATE (24") 4. "ALORIS" TOOL POST & 4 HOLDERS (#5-BS) 5. "ALORIS" TOOL POST & 6 HOLDERS (#5-SET) 6. "DORIAN" TOOL POST WITH HOLDERS (SD50DA-TS) 7. MICROMETER STOP 8. SIX POSITION CARRIAGE STOP 9. TAPER TURNING ATTACHMENT 10. INSTALLATION FEE FOR TAPER TURNING ATTACHMENT 11. "NEWALL" 2-AXIS DRO (18" X 60" TRAVEL) 12. "NEWALL" 2-AXIS DRO (18" X 80" TRAVEL) 13. "NEWALL" 2-AXIS DRO (18" X 120" TRAVEL) 14. "NEWALL" 2-AXIS DRO (18" X 160" TRAVEL) 15. "MAGNESCALE" 2-AXIS DRO (18" X 60") 16. "MAGNESCALE" 2-AXIS DRO (18" X 80") 17. INSTALLATION FEE FOR DRO **ABOVE PRICES ARE BASED ON F.O.B., CA **PRICES AND DESIGNS ARE SUBJECT TO CHANGE WITHOUT NOTICE **MANUFACTURER RESERVES THE RIGHT TO MODIFY THE DESIGN WITHOUT NOTICE

ACER DYNAMIC 29" SERIES HIGH SPEED PRECISION LATHE
LATHES, ENGINE_See also other Lathe Categories