DAINICHI DL75 FLATBED CNC LATHE
LATHES, COMBINATION, N/C & CNCEquipped with 28" 4-jaw chuck with reversible top jaws, 6(1/4) 4 way tool post, Roller steady rest, Full length steady rest, Dual pull out chip pans, Coolant pump and piping
Swing | 29.5" |
Machining Length | 157" |
Chuck Size | 17.75" |
Power | 20 hp |
Max RPM | 1,120 RPM |
Turning Dia | 28.8" |
Tailstock | Yes |
Control | CNC (FANUC 20TA) |
Dimensions | 60"Wx70"Hx174"L |
Weight | 11,300 |
MAIN SPECIFICATIONS
Swing over bed.......... 29.5"
Swing over carriage.......... 18.8"
Distance between centers.......... 98"
Max cutting force.......... 1386LBS
Max supporting capacity.......... 3300LBS
Main spindle.......... DL75
Spindle bore.......... 3.34"
Spindle nose.......... JIS A1-11
Spindle speed (2 group).......... 3-1120
CARRIAGE
Width of crosslide.......... 9.4"
Type of tool post.......... 4-way turret
Tool size.......... 1"
X axis travel.......... 17.72"
Z axis travel.......... 100.76"
Rapid traverse.......... X axis.......... min. 59"
Z axis.......... 118"
Cutting feed.......... X/Z axis 20 steps 0.002" - 0.157"/rev.
Threading range.......... in case pitch(inch) x RPM = 118.11" or less, no limitation
TAILSTOCK
Tailstock spindle diameter.......... 3.54"
Tailstock spindle travel.......... 7.87"
Size of center.......... MT No.5
Width.......... 17.5"
Length.......... 174"
MOTOR
Main drive motor (DL75).......... 20hp
Lubricant pump motor.......... Headstock 0.27hp, Carriage 0.03hp
X axis servo motor.......... 1.2hp
Z axis servo motor.......... 2.4hp
FEATURES AND EQUIPPED WITH
28" 4-jaw chuck
6 1/4 4 way tool post
Roller steady rest
Full length steady rest
Dual pull out chip pans
Coolant pump and piping