| Table-W | 10" |
| Table-L | 54" |
| Travel-Long | 36.3" |
| Travel-Cross | 15.7" |
| Power | 3 hp |
| RPM | 4,200 RPM |
| Taper | r8 |
Table....................................................10" x 54"
Longitudinal travel (X-axis).............................36"
Cross travel (Y-axis)....................................15.75"
Knee travel (manual).....................................16"
Quill travel.............................................5"
Quill diameter...........................................3.38"
Spindle nose to table top (D)............................1.96" to 17.9"
Spindle taper............................................R85/ NT30
Spindle speed............................................70 to 4200 rpm ( Lo / Hi Gears)
Load capacity............................................770 Lbs
T-slot...................................................0.62" x 2.55"
Transmission of spindle & motor Timing belt:
Head Swivel (left/right).................................+ 90 / - 90 Degree
Head tile (front/back)...................................+45 / -45 Degree
Ram travel...............................................24"
Motor:
Spindle motor/max torque.................................3 HP
Coolant pump.............................................1/8 Hp
Lubrication pump.........................................One Shot
Power requirement........................................4KVA 3 Phase 208V - 230V ( max)
Dimension & Weight
Air Requirement Optional with power draw bar.............90- 100 psi
Oil Way Requirement......................................Mobil;e Vectra #2 / Oil Way #2
Floor space(L x W x H)...................................110" x 100" x 89"
Net weight...............................................2860 Lbs
Features & Equipment:
3 H.P. Variable Speed Head
3 Axis Newall DP700 Digital Readout System
3-axis power feeds
Air Operated Maxi-Torque Power Drawbar
Coolant Pump, Piping and Nozzle
One Shot Lubrication System
Dual table and saddle locks
