Technomagnete MCU Plus electro-permanent magnetic chuck controller w/ 2 magnetic chucks
Have one to sell?
ConditionUsed
1 available
$8,950.00 USD
2 Used Tecnomagnete electro-permanent magnetic chucks with MCU Plus controller, believed to be QX406.
Both Chuck Dimensions: 25" x 15.875" x 5.25". Milled specifics: 24.875" x 15.75; removed from a Makino 800 mm pallet. Sold as-is, untested.
Tecnomagnete MCU Plus magnetic chuck controller. It sends electrical pulses to a compatible electro-permanent magnetic chuck to clamp and release steel workpieces during machining. The chuck holds the workpiece without continuous power. Tecnomagnete
The nameplate shows 460 V AC, single-phase, 50/60 Hz, part number 961453. The photo shows the controller and cable. The matching chuck model would need to be verified from the chuck’s own nameplate.
2 Used Electro-permanent Magnetic Chuck by TECNOMAGNETE, Model QX406. Dimensions: 25" x 15.875" x 5.25". Milled specifics: 24.875" x 15.75". Removed from a Makino 800mm pallet. Ready for loading onto the truck as-is.
Overall Length……….25”
Overall Width……….15.875”
Width at the plug……….18”
Overall Height……….5.25”
Milled Length……….24.875”
Milled Width……….15.75”
Height without stop……….3.25”
Came off of a Makino 800mm pallet
2 Used Tecnomagnete electro-permanent magnetic chucks with MCU Plus controller, believed to be QX406.
Both Chuck Dimensions: 25" x 15.875" x 5.25". Milled specifics: 24.875" x 15.75; removed from a Makino 800 mm pallet. Sold as-is, untested.
Tecnomagnete MCU Plus magnetic chuck controller. It sends electrical pulses to a compatible electro-permanent magnetic chuck to clamp and release steel workpieces during machining. The chuck holds the workpiece without continuous power. Tecnomagnete
The nameplate shows 460 V AC, single-phase, 50/60 Hz, part number 961453. The photo shows the controller and cable. The matching chuck model would need to be verified from the chuck’s own nameplate.
2 Used Electro-permanent Magnetic Chuck by TECNOMAGNETE, Model QX406. Dimensions: 25" x 15.875" x 5.25". Milled specifics: 24.875" x 15.75". Removed from a Makino 800mm pallet. Ready for loading onto the truck as-is.
Overall Length……….25”
Overall Width……….15.875”
Width at the plug……….18”
Overall Height……….5.25”
Milled Length……….24.875”
Milled Width……….15.75”
Height without stop……….3.25”
Came off of a Makino 800mm pallet
We use cookies to improve your experience. Privacy Policy.