ACER ATL 1840E FLAT BED CNC TEACH LATHE
Have one to sell?
ConditionNew
500 available
New
ACER 1840E, FAGOR 8055 i/A-TC, 2.2"
FEATURES:
* 10 HP SINGLE SPEED SPINDLE MOTOR FOR 3 PHASE 60 HZ WIRING
* HARDENED AND GROUND MEEHANITE CASTING BEDWAY
* HARDENED AND GROUND GEARS AND SPINDLE
* 2 GEAR RANGES: LOW - 60 - 6,000 RPM; HIGH - 601 - 3,000 RPM
* D1-6 CAMLOCK WITH 2.2" SPINDLE BORE
* "FAGOR" 8055 i/A-TC CONTROL
* CONSTANT SURFACE SPEED
* MANUAL - TEACH - CNC MODES
* DUAL MPG HANDWHEEL
* C3 BALL SCREW ON X-AXIS & C5 BALL SCREW ON Z-AXIS
* LASER CALIBRATION ON ALL AXES
SPECIFICATIONS:
WORKING CAPACITY:
SWING OVER BED.......................................... 18.11"
SWING OVER CROSS SLIDE.................................. 9.06"
MAX. CUTTING LENGTHS:
4-WAY TOOL POST / H4 ELECTRIC TURRET; SPINDLE W / 3
JAW CHUCK CENTER TO CENTER............................. 30.71"
V8 ELECTRIC TURRET: SPINDLE W / 3 JAW CHUCK TO CENTER... 27.56"
CENTER TO CENTER........................................ 35.43"
MAX. CUTTING DIAMETERS:
4-WAY TOOL POST / H4 ELECTRIC TURRET.................... 18.11"
V8 ELECTRIC TURRET...................................... 18.11"
MAX. WEIGHT LOADING BETWEEN CENTER TO CENTER............ 1254 LBS
CENTER HEIGHT........................................... 9.06"
WIDTH OF BED............................................ 11.81"
HEADSTOCK & MAIN SPINDLE:
RANGE OF SPINDLE SPEEDS:
HIGH.................................................... 601 - 3000 RPM
LOW..................................................... 60 - 600 RPM
SPINDLE NOSE; INTERNAL TAPER............................ A1-6 1:20
SPINDLE BORE............................................ 2.20"
CROSS-SLIDE & CARRIAGE:
CROSS SLIDE TRAVEL (X-AXIS)............................. 11.02"
LONGITUDINAL TRAVEL (Z-AXIS)............................ 31.89"
AC SERVO (X AND Z-AXES)................................. 6.3 NM
DIAMETER OF BALL SCREW (X-AXIS)......................... 0.98" P5 C3
DIAMETER OF BALL SCREW (Z-AXIS)......................... 1.57" P10 C5
RAPID TRAVEL SPEED (X-AXIS)............................. 196.85 IPM
RAPID TRAVEL SPEED (Z-AXIS)............................. 275.59 IPM
TURRET:
TOOL STATION - MANUAL 4 WAY POST ELECTRIC H4 TURRET ELECTRIC V8 TURRET
SIZE OF CUTTING TOOL .98" .98" .79"
BORING BAR DIAMETER .98"
TAILSTOCK:
QUILL DIAMETER.......................................... 2.28"
QUILL TRAVEL............................................ 6.69"
QUILL TAPER............................................. MT #4
MOTOR:
MAIN SPINDLE............................................ 10 HP
FORCED LUBE PUMP FOR HEADSTOCK.......................... 1/4 HP
COOLANT PUMP............................................ 1/6 HP
TANK CAPACITY (APPROX.):
COOLANT TANK W/ CHIP TRAY (OPT.)........................ 12.42 GAL.
MEASUREMENTS:
WEIGHT (NET / GROSS).................................... 4620 / 5500 LBS
PACKING DIMESIONS (L x W x H)........................... 90.2" x 57.9" x 67"
STANDARD ACCESSORIES (INCLUDED):
HALOGEN WORK LIGHT COOLANT SYSTEM
TOOL BOX WITH TOOLS AUTOMATIC LUBRICATION SYSTEM
FULLY ENCLOSED SPLASH GUARD MANUAL TAILSTOCK
CONTROL CAPABILITIES:
USE AS A DRO FOR MANUAL MODE POWERFUL CNC FULL AUTO MODE
NO PROGRAMMING EXPERIENCE REQUIRED ELECTRIC HANDWHEEL FOR SEMI-AUTO MODE
PROGRAM IN TEACH MODE CONVERSATIONAL OR G-CODE PROGRAMMING
PROGRAM W/ CANNED CYCLES MINIMUM SET-UP TIME
PRICE:
ACER ATL 1840E FLAT BED CNC TEACH LATHE.......... $49,820.00
OPTIONAL ACCESSORIES:
8" 3-JAW CHUCK (D1-6) W/ DIRECT MOUNT................... 450.00
10" 3-JAW INDEPENDENT CHUCK (D1-6) W/ DIRECT MOUNT...... 550.00
12" 4-JAW INDEPENDENT CHUCK............................. 700.00
STEADY REST W/ ROLLERS (20 - 160mm)..................... 450.00
FOLLOW REST (25 - 90mm)................................. 300.00
FACE PLATE (14")........................................ 500.00
"ALORIS" TOOL POST & 4-HOLDER SET (#3 - BS)............. 1,000.00
"ALORIS" TOOL POST & 6-HOLDER SET (#3 - SET)............ 1,300.00
"DORIAN" TOOL POST & 4-HOLDER SET....................... 1,000.00
FOUR WAY TOOL POST...................................... 500.00
H4 ELECTRIC TOOL POST (C6140)........................... 4,200.00
ON-SITE TRAINING (ACCOMIDATIONS EXTRA).................. 800.00/ DAY
PAYMENT TERMS:
30% DOWN PAYMENT WITH PURCHASE ORDER
BALANCE NET 30 UPON CREDIT APPROVAL
*** ALL PRICES ABOVE ARE BASED ON F.O.B. ANAHEIM, CA
*** PRICES AND DESIGNS ARE SUBJECT TO CHANGE WITHOUT NOTICE
*** MANUFACTURER RESERVES THE RIGHT TO MODIFY THE DESIGN WITHOUT NOTICE
ACER 1840E, FAGOR 8055 i/A-TC, 2.2"
Acer pursues excellence in (4) four main areas: Quality, Value, Service, Availability. Acer Machines are superior in quality, fit and finish. The proposals we offer are highly competitive. ACER offers product support in the field, and on the phone.
Allow T.R. Wigglesworth Machinery Co to propose the right ACER product to meet your requirements today.
Imperial
| Bar Capacity | 2" |
| Control | CNC (FAGOR 8055 IA) |
FEATURES:
* 10 HP SINGLE SPEED SPINDLE MOTOR FOR 3 PHASE 60 HZ WIRING
* HARDENED AND GROUND MEEHANITE CASTING BEDWAY
* HARDENED AND GROUND GEARS AND SPINDLE
* 2 GEAR RANGES: LOW - 60 - 6,000 RPM; HIGH - 601 - 3,000 RPM
* D1-6 CAMLOCK WITH 2.2" SPINDLE BORE
* "FAGOR" 8055 i/A-TC CONTROL
* CONSTANT SURFACE SPEED
* MANUAL - TEACH - CNC MODES
* DUAL MPG HANDWHEEL
* C3 BALL SCREW ON X-AXIS & C5 BALL SCREW ON Z-AXIS
* LASER CALIBRATION ON ALL AXES
SPECIFICATIONS:
WORKING CAPACITY:
SWING OVER BED.......................................... 18.11"
SWING OVER CROSS SLIDE.................................. 9.06"
MAX. CUTTING LENGTHS:
4-WAY TOOL POST / H4 ELECTRIC TURRET; SPINDLE W / 3
JAW CHUCK CENTER TO CENTER............................. 30.71"
V8 ELECTRIC TURRET: SPINDLE W / 3 JAW CHUCK TO CENTER... 27.56"
CENTER TO CENTER........................................ 35.43"
MAX. CUTTING DIAMETERS:
4-WAY TOOL POST / H4 ELECTRIC TURRET.................... 18.11"
V8 ELECTRIC TURRET...................................... 18.11"
MAX. WEIGHT LOADING BETWEEN CENTER TO CENTER............ 1254 LBS
CENTER HEIGHT........................................... 9.06"
WIDTH OF BED............................................ 11.81"
HEADSTOCK & MAIN SPINDLE:
RANGE OF SPINDLE SPEEDS:
HIGH.................................................... 601 - 3000 RPM
LOW..................................................... 60 - 600 RPM
SPINDLE NOSE; INTERNAL TAPER............................ A1-6 1:20
SPINDLE BORE............................................ 2.20"
CROSS-SLIDE & CARRIAGE:
CROSS SLIDE TRAVEL (X-AXIS)............................. 11.02"
LONGITUDINAL TRAVEL (Z-AXIS)............................ 31.89"
AC SERVO (X AND Z-AXES)................................. 6.3 NM
DIAMETER OF BALL SCREW (X-AXIS)......................... 0.98" P5 C3
DIAMETER OF BALL SCREW (Z-AXIS)......................... 1.57" P10 C5
RAPID TRAVEL SPEED (X-AXIS)............................. 196.85 IPM
RAPID TRAVEL SPEED (Z-AXIS)............................. 275.59 IPM
TURRET:
TOOL STATION - MANUAL 4 WAY POST ELECTRIC H4 TURRET ELECTRIC V8 TURRET
SIZE OF CUTTING TOOL .98" .98" .79"
BORING BAR DIAMETER .98"
TAILSTOCK:
QUILL DIAMETER.......................................... 2.28"
QUILL TRAVEL............................................ 6.69"
QUILL TAPER............................................. MT #4
MOTOR:
MAIN SPINDLE............................................ 10 HP
FORCED LUBE PUMP FOR HEADSTOCK.......................... 1/4 HP
COOLANT PUMP............................................ 1/6 HP
TANK CAPACITY (APPROX.):
COOLANT TANK W/ CHIP TRAY (OPT.)........................ 12.42 GAL.
MEASUREMENTS:
WEIGHT (NET / GROSS).................................... 4620 / 5500 LBS
PACKING DIMESIONS (L x W x H)........................... 90.2" x 57.9" x 67"
STANDARD ACCESSORIES (INCLUDED):
HALOGEN WORK LIGHT COOLANT SYSTEM
TOOL BOX WITH TOOLS AUTOMATIC LUBRICATION SYSTEM
FULLY ENCLOSED SPLASH GUARD MANUAL TAILSTOCK
CONTROL CAPABILITIES:
USE AS A DRO FOR MANUAL MODE POWERFUL CNC FULL AUTO MODE
NO PROGRAMMING EXPERIENCE REQUIRED ELECTRIC HANDWHEEL FOR SEMI-AUTO MODE
PROGRAM IN TEACH MODE CONVERSATIONAL OR G-CODE PROGRAMMING
PROGRAM W/ CANNED CYCLES MINIMUM SET-UP TIME
PRICE:
ACER ATL 1840E FLAT BED CNC TEACH LATHE.......... $49,820.00
OPTIONAL ACCESSORIES:
8" 3-JAW CHUCK (D1-6) W/ DIRECT MOUNT................... 450.00
10" 3-JAW INDEPENDENT CHUCK (D1-6) W/ DIRECT MOUNT...... 550.00
12" 4-JAW INDEPENDENT CHUCK............................. 700.00
STEADY REST W/ ROLLERS (20 - 160mm)..................... 450.00
FOLLOW REST (25 - 90mm)................................. 300.00
FACE PLATE (14")........................................ 500.00
"ALORIS" TOOL POST & 4-HOLDER SET (#3 - BS)............. 1,000.00
"ALORIS" TOOL POST & 6-HOLDER SET (#3 - SET)............ 1,300.00
"DORIAN" TOOL POST & 4-HOLDER SET....................... 1,000.00
FOUR WAY TOOL POST...................................... 500.00
H4 ELECTRIC TOOL POST (C6140)........................... 4,200.00
ON-SITE TRAINING (ACCOMIDATIONS EXTRA).................. 800.00/ DAY
PAYMENT TERMS:
30% DOWN PAYMENT WITH PURCHASE ORDER
BALANCE NET 30 UPON CREDIT APPROVAL
*** ALL PRICES ABOVE ARE BASED ON F.O.B. ANAHEIM, CA
*** PRICES AND DESIGNS ARE SUBJECT TO CHANGE WITHOUT NOTICE
*** MANUFACTURER RESERVES THE RIGHT TO MODIFY THE DESIGN WITHOUT NOTICE
We use cookies to improve your experience. Privacy Policy.